See my article at http://drewspewsmuse.blogspot.com/2016/06/how-i-hacked-self-balancing-scooter.html about reverse-engineering the self-balancing scooter hoverboard serial protocol!
, https://i.ytimg.com/vi/Stgjf_x8wHk/hqdefault.jpg
source
2021-05-22
How did you overcome the PID loop of the main board? The article does not go over that.
hi there! i can't seem to find any details on how to connect up my arduino to the hoverboard motherboard. I'm using an arduino mini
ok my friend
hi my friend how are you, i want ask you some question can give me your mobile or send whatsapp for me on my number is +971506233371, please, i want now how to connect the battery and PIC
Hello, I am currently trying to operate a similar project whereby I have a hoverboard 300W brushless motor connected to an 40A electronic speed controller, which is controlled via a throttle connected to an Arduino Mega, all powered by a 6-s Lipo battery pack. An issue I have is when I calibrate the ESC and turn the throttle from minimum, the motors do not rotate they simply vibrate, however, once I give them a push, they begin operating perfectly and respond to the throttle by accelerating/decelerating accordingly, however, once the throttle goes too low, it begins vibrating and gets stuck in that mode. What do you think could cause this issue?
I don't know whether it is an error in my calibration of the ESC or through my Arduino code
Boa tarde pretendo montar um sistema desses para uma trabalho de faculdade você pode me ajudar eu não consigo acessar o site que você deixou para baixar por favor você pode me ajudar
Hello Can you help me to set up my project I really need your help
I'm sorry. I want to know the code that you use. And the circuit.Please!!!
Could you show me the wiring or schematic? Thank you in advance 🙂
how the fuck you are going to balance yourself
For those who want details on this, http://hackaday.com/2016/06/10/reverse-engineering-hoverboard-motor-drive/
@andrew dinbitz, Do you have any schematics or a how-to… please please.. and can you get it to go forward and reverse?
Excellent proyect,
I like it.
which is better stm32 or teensy 3.2
Dear friend
what is the type of smart balance wheel's motor ? is it ( stepper motor ??) and what is the driver shelled i can use with Arduino UNO or MEGA ?
Hi , thanks for the video and the efforts to open those cool machines 🙂 Could you provide a simple wiring schematics (I have students who want to use this for a cheap electri wheelchair)? Thx ! Kevin
What is the blog name?
suggestion: try to drive it like a stepper or a servo, thru steps to change or hold position as used in brushless gimbals
Hello there. hoverboard then we can take a motor with ESC?
Can I use Arduino UNO or MEGA for this?
Do you have any idea of the voltage used or the amp draw on each motor? I saw the article said 350 Watts. I have a similar hoverboard, I was wondering if can I use a big RC ESC with Arduino pwm to drive the motor?
what rpm did You reach?