For this project let’s build a sexy looking generator that uses electricity to convert water into an extremely powerful fuel! Here’s how to build an Oxy-Hydrogen generator from scratch.

[✓] Solar Panels: http://amzn.to/2c69sAM
[✓] 4” ABS clean out fittings: http://amzn.to/2cRYegg
[✓] 3/8” Poly Tubing: http://amzn.to/2cqAyOS
[✓] 100 grit sandpaper: http://amzn.to/2cr0ywC
[✓] Clear silicone 1 caulk: http://amzn.to/2cg3Lle
[✓] Rubber Mallet: http://amzn.to/2cg3i2b
[✓] ABS Cement: http://amzn.to/2cg3a2K
[✓] 1/4” 90 degree Elbow: http://amzn.to/2caxbOC
[✓] 1/2” drill bit: http://amzn.to/2cg4LWf
[✓] 18 Thread TAP: http://amzn.to/2cqCMxy
[✓] Pipe Tape: http://amzn.to/2cRZLTS
[✓] 3/8” Swivel Elbow: http://amzn.to/2cRLOsS
[✓] 5/16 drill bit: http://amzn.to/2czNUxg
[✓] Bench vice: http://amzn.to/2cg5dnE
[✓] Stainless steel jam nuts: http://amzn.to/2cg70sJ
[✓] Acrylic glue: http://amzn.to/2cRLDy3

I’ve been getting a lot of requests for build plans, so I made a 23 page .pdf file you can have for $20 (This helps compensate for the 3 days it took me to make them). You can get them here: http://bit.ly/HHOParts

Everything you need to know should be in the video, but the plans have templates for the stainless steel plates, a parts list with SKU numbers, pictures, instructions, and expanded view diagrams of the systems, including an alternate “all ABS” option.

Endcard Links:

H2O Explodes: https://goo.gl/wMFjlz
Power of the Sun: https://goo.gl/5ghwUx
Fire Piston: https://goo.gl/BSl8QT
Scorcher Frame: https://goo.gl/OFCaEr

Social Media Links:

Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Twitter: http://www.twitter.com/thekingofrandom

Business Inquiries: For business and sponsorship inquiries please contact us directly: http://www.youtube.com/thekingofrandom/about

WARNING:

This project should not be attempted without adult supervision and adequate training. Misuse, or careless use, of tools or projects may result in serious injury, property damage, and/or death. Use of this video content is at your own risk.

This is not a “free energy” device, “over unity” device, or a claim to be the solution to the worlds energy crisis. This is a project I did to experiment with the electrolysis of water, and the resulting gasses collected.

Music By: Kevin Macleod (Breakdown) http://incompetech.com/

Project Inspired By:

“Smack’s Booster”: http://www.free-energy-info.co.uk/Smack.pdf

Project History & More Info:

The generator requires electricity to electrolyze H2O (water) into gas. The resulting mixed gas is sometimes referred to as Oxy-Hydrogen gas, which is 2 parts Hydrogen (H2) and 1 part Oxygen (O2). I typically hook this up to my car battery while the vehicle is running, so the alternator takes most of the load. On 12 volts I get about 1.5 liters/minute, but when I want to make the gas faster, I hook 2 car batteries in series for 24 volts, and this exponentially increases the gas production to over 5 liters per minute.

Current draw seems to be around 20-50 amps depending on whether you use 12-24 volts. High current draws mean the electrolyte heats up, and if left too long the plastic can warp or melt causing structural failure.

Some people ask why the plates aren’t all electrically connected. The plates that aren’t connected are called “floater” plates, or “neutral” plates. There is too much information to post about them here, so do a google search, or check out websites like http://www.hho4free.com/neutral_plates.htm for an in depth explanation of the theory.

I used KOH as my electrolyte because research suggested it was the best. I haven’t experimented with other electrolytes, but have heard that salt, sodium hydroxide, vinegar, etc could work, but will dirty and may corrode the plates. Potassium Hydroxide keeps the system clean, however, it is caustic, so be careful if you choose to use it. You can probably get away with about 2-4 teaspoons of KOH per 6 liters of water.

This system produces an extremely powerful OxyHydrogen gas. When the gas is used, it simply turns back into water, and that’s good for the environment. However I believe it takes more electric energy to produce the gas than is obtained from the gas. This device merely converts the energy from one form to another, with given losses.

As long as you have enough electricity, the amount of water already in this system is enough to produce thousands and thousands of liters of fuel. Some people say this is the fuel of the future. Either way, it’s a very powerful gas!

If you need more information, or want to purchase build plans for this design, you can get them here: http://bit.ly/HHOParts
#tkor #thekingofrandom

, https://i.ytimg.com/vi/cqjn3mup1So/hqdefault.jpg

source

42 Comments

  1. A project to make & install in a vehicle – and keep Quiet, about your fuel source, or, get hassled by the petroleum interests, as your one vehicle, is a threat to their profits.

  2. How well is it structured? I would like to know how many negatives and positives you used to make the cell and how many neutral plates. regards

  3. Tkor then making rocket hydrogen fuel liquid nitrogen missile big explosion
    Tkor now Let's melt crayons open marker and play with balloons and jello

  4. Loved every minute of it, EXCEPT the bloody music. No need for it, spoils the whole video.

  5. This is an energy producing loss to begin with. You can do FAR MORE just with the electricity you use in electrolysis than in this chemical conversion. I urge caution in dealing with hydrogen, the explosive hydrogen to air ratio is very wide.

  6. I think this time around oil cartel can no longer protect its superiority. EV, hydrogen-powered car will receive no more resistance from fossil fuel-powered vehicles….the recent floods in china, german (powerhouse in car manufacturing) and other european countries due to climate change will speed up the use of this kind of tech in vehicles

  7. I tried this and blew up my house now I’m homeless, thanks a lot!!!!! ? ? ?

  8. Can you tell me how much DC voltage and current requirement for producing HHO for this kit

  9. All you need is metal zirconium alloy .
    Place in water… Chemical reactions.
    Unlimited supply of hydrogen and oxygen to heat or fuel or run things.

  10. hi i wish i have the same bubblier that you create that will exactly fit into my motor cycle to convert gas to water type fuel.

  11. Wow so many years ago, I still remember first time watching. And I’m guessing this is the same kind of fuel that Toyota Mirai uses?

  12. Nice video. Cool project. But I always that that the energy input needed for electrolysis was greater than the energy output that you got from ignition of hydrogen and oxygen?

  13. I made this gor a 700hp Detroit diesel and I filled a 5 gallon psil with the gas to demonstrate it,I lit it we blew out 100 windows at the warehouse district.the cops military showed up.seized my device never saw it again.

  14. Believe it or not when i forst saw this video when it come out almost a decade ago, i had to download it and save it thinking there is no way they will keep it on youtube.

Leave a Reply

Your email address will not be published. Required fields are marked *