https://amzn.to/3dpUqCD$0 For New members first order & Low Price for PCB Stencil at https://www.pcbway.com/
How to make the wearable activity tracking watch? This is a wearable amazing gadget designed to vibrate when it detects stagnation. Do you spend most of your time on the computer like me? Are you sitting for hours without realizing it? This is what inspired the DIY Vibrating Watch, a simple activity tracker that will notify you when you are inactive for a pre-set period of time. In this project, we’ll build a wearable gadget designed to vibrate when it detects stagnation. This device is low-cost and can help keep you on the move.
Please subscribe ❤️ …and turn on notifications! 🔔
➤ About the Schematic:
The heart of this project is the ATtiny85. This microcontoller can be programmed with the Arduino IDE and is easy to fit into projects to keep cost and size down. With three analog inputs and two PWM outputs, the ATtiny85 has just enough I/O for this project. For our activity sensing needs, I am using the MMA7341LC 3-axis accelerometer which outputs each axis on a different analog line. This accelerometer also has a sleep mode that can be activated by the microcontroller to improve battery life. Our activity reminder will come through a vibration motor which, despite its small size is powerful enough.
Download Gerber Files or Order PCB from PCBWay (10 pcs PCB order US $5.00):
https://www.pcbway.com/project/shareproject/ATtiny85_Wearable_Activity_Tracking_Watch.html
ATtiny85 IC:
https://bit.ly/3g7yVXJ
https://amzn.to/39taKSg
Vibration Motor:
https://bit.ly/3f9h5C4
https://amzn.to/39wpW0I
3-Axis Accelerometer:
https://bit.ly/309kbSB
https://amzn.to/3m9vnaX
Battery Holder:
https://bit.ly/2BBnmZC
https://amzn.to/3m9myhl
8 Pin Socket:
https://bit.ly/339tQtY
Slide Switch:
https://bit.ly/30SPrnP
https://amzn.to/2QSXRdI
Resistor:
https://bit.ly/2WFsNPl
https://amzn.to/3ufYYmd
Strap:
https://bit.ly/3g8GhKj
https://amzn.to/3wjqJMf
CR2032 Battery
Soldering Tools:
http://bit.ly/2Kbr9hQ
https://amzn.to/3dgwCRO
—————————————————————————–
➤ Programming an ATtiny85 with an Arduino UNO:
Arduino Uno R3:
http://bit.ly/2AXpHuw
https://amzn.to/2LZr6t4
10uF Capacitors:
http://bit.ly/2s6Sonz
https://amzn.to/39qPEDS
Jumper Wires:
http://bit.ly/2J6de9E
https://amzn.to/3doetmT
Breadboard:
http://bit.ly/2H9YSUa
https://amzn.to/3qxLxwm
1) Configuring Arduino Uno as a ISP (In-System Programming):
To program the ATtiny85 we need to first set Arduino Uno in ISP mode. Connect your Arduino Uno to the PC. Open Arduino IDE and open the ArduinoISP example file (File – Examples – ArduinoISP) and upload it.
2) Adding ATtiny85 Support to Arduino IDE:
By default Arduino IDE doesn’t support ATtiny85 so we should add ATtiny boards to Arduino IDE. Open File – Preferences and in the Additional Boards Manager URLs give this URL:
https://raw.githubusercontent.com/damellis/attiny/ide-1.6.x-boards-manager/package_damellis_attiny_index.json
Open Tools – Board – Board Manager. Scroll down the list where it says “ATtiny by Davis A. Mellis”. Click on that and install it. Now you would be able to see a new entry in the Board menu
3) Connecting ATtiny85 with Arduino Uno:
Now with all the above things ready we will start programming the ATtiny85. Connect the ATtiny85 to Arduino Uno using breadboard.
Add a 10uF capacitor between RESET and GND in the Arduino Uno. This is to avoid the Arduino Uno from being auto reset when we upload the program to the ATtiny85.
—————————————————————————–
➤ Burn Bootloader and Uploading Source Code to the ATtiny85:
1) Select ATtiny under Tools – Board.
2) Then select ATtiny85 under Tools – Processor.
3) Select 8 MHz (internal) under Tools – Clock.
4) Then make sure Arduino as ISP is selected under Tools – Programmer
By default the ATtiny85 runs at 1MHz.
5) To make it to run at 8MHz select Tools – Burn Bootloader.
6) You will get the above message if burning bootloader was successful.
7) Now open the source code and upload it.
Get the Source Code from GitHub:
https://github.com/MertArduino/ATtiny85-Wearable-Activity-Tracking-Watch
—————————————————————————–
Track: Broke — Soyb [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/CuT6NlEgdQA
Free Download / Stream: alplus.io/broke
Track: I Am OK — Vishmak [Audio Library Release]
Music provided by Audio Library Plus
Watch: https://youtu.be/KZVS1ag3itA
Free Download / Stream: alplus.io/i-am-ok
Track: Besomorph & Coopex – Redemption (ft. Riell) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/ZGrWry_4Q8s
Free Download / Stream: ncs.io/RedemptionYO
, https://i.ytimg.com/vi/ZJ9seGhftEM/hqdefault.jpg
source
Source Code: https://github.com/MertArduino/ATtiny85-Wearable-Activity-Tracking-Watch
Recommended Items:
Use Your Muscles in Project – https://amzn.to/3wdL45C
37 Sensor & Module Packages – https://amzn.to/3m66WeQ
Try this Robot Arm – https://amzn.to/3fq8DCl
Best Resin 3D Printer – https://amzn.to/39tY8KB
Arduino Compatible Kits – http://bit.ly/2J2AFF7
Banggood Spring Sale – https://bit.ly/3slMbOn
hello , help me make arduino control servo with voice using module bluetooth hc05 or hc06, thank you so much
Please give me a aurdino sir🙏
Great work!
Can I use mpu6050?
If yes what modification need to be done?
Very nice!
Please make in Rubik's cube solving robot
MERT ARDUİNO
bu bilgileri yabancılarla paylaşacağına,bunların nasıl yapılacağını TÜRK lerlede paylaşır mısın?
zaten yabancıların fazlasıyla kaynağı var.
I'm totally going to use it for alarm clock (I'm deaf)
👏👏👏
A super different thing
Bu harika proje ve video için teşekkürler Mert Hocam. Devamını dört gözle bekliyorum.
Love u so much ♡ I think one video tutorial will be great how to prepare diagram and upload on pcbway. 🙂👌
Much love from south africa man you are good.
lazy people are also lazy to do this DIY 😂
Hangi pcb çizim programını kullanıyorsun?
Very goood job👍
Whatever you do, lazy is lazy, they don't change… 🥱😴, Nice project… ✔✔😊✔✔
Sorry i am late but not last😁😁😁
Well nice 🎥 video 😍
One day you will get 1m subs😊
amazing sir,love from telangana
Awesome