The new high powered Makita Power Tools Targeting Gas Tools and Outdoor Power Equipment with the XGT 40/80v. They have release a new XGT 8.0ah 40v battery to power The Makita XGT 14-INCH POWER CUTTER GEC01 (Launching in 2022) as a 80V power tool that uses two 40V max XGT batteries. It’s very similar to the way 36V LXT tools use two 18V LXT batteries. Any two XGT batteries will work, but the new 8.0ah high-capacity runtime batteries work best in this battery electric gas alternative solution.
It’s a full-size 14-inch saw with a 5″ cut capacity with inspiration straight from its gas counterpart.
The following XGT Products are launching this month:
Construction
80V max (40V X2) XGT Brushless 28 lb. AVT® Demolition Hammer (GMH02) – The GMH02 delivers up to 27.5 Joules (20.2 ft.lbs.) of impact energy for up to 15% faster breaking efficiency than a corded equivalent demolition hammer (Makita model HM1213C). Anti-Vibration Technology (AVT), an internal counterbalance system, reduces vibration for user comfort. This demolition hammer is AWS-capable (transmitter sold separately). Auto-start Wireless System (AWS) allows for wireless power-on/off communication between the tool and a dust extractor. The hammer also features multiple angle settings, soft start, built-in L.E.D. light, constant speed control and a variable speed dial and trigger.
40V max XGT Brushless 6” Angle Grinders (GAG07 and GAG08) – These angle grinders deliver the power and performance for heavy-load applications. They both feature Active Feedback-sensing Technology (AFT®), which turns off the motor if rotation of the wheel is suddenly forced to a stop. Both grinders also feature an electric brake. The GAG07 has a slide switch, while the GAG08 has a paddle switch.
Residential Construction
40V max XGT Brushless 8-1/2” Dual Bevel Sliding Compound Miter Saw (GSL02) –The new XGT Miter Saw delivers 4,800 RPMs for faster cutting than corded miter saws. It has a large cutting capacity at 90-degrees and can cut up to 3×12 material in a single pass. It has positive miter stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° left or right. It miters 0-60° left and right and bevels 0-48° left and right.
An L.E.D. light casts a shadow of the saw blade onto the material for an exact cutting line. The rail-forward design maximizes workspace when up against a wall. Extension wings adjust quickly for material support. The miter saw is AWS-capable (transmitter sold separately).
Outdoor Power Equipment
40V max XGT Brushless Blower (GBU01) – The new brushless blower offers up to 55% more blowing force than a comparable handheld gas blower (model BHX2500CA). It features a cruise control lever with variable speed trigger and turbo boost mode for heavy debris clean-up. The GBU01 can deliver up to 565 CFM with turbo boost. The blower has an in-line fan design for better balance and ergonomics. The nozzle telescopes and features a downward end point to provide more powerful air flow. The blower can get up to 35 minutes of run time with a 40V max XGT 4.0Ah Battery.
40V max XGT Brushless 15” String Trimmer (GRU01) – The new brushless string trimmer delivers high power equivalent to gas, without the hassles. Automatic Torque Drive automatically shifts from 3,500 to 6,500 RPM. Users can get up to 1 hour of run time with a 40V max XGT 4.0Ah Battery. It features the new Rapid Load Trimmer Head, which loads lines in seconds with three easy steps.
Other Products
40V max XGT Bluetooth Job Site Radio (GRM03) – This radio provides premium sound quality for an enhanced audio experience. It features two 2.5” side-firing speakers and one 4” bottom firing subwoofer. There are seven selectable sounds modes for different genres of music.
40V max XGT 13” Fan (CF002GZ) – The fan features a powerful motor that delivers up to 740 CFM on high setting. It automatically oscillates 45° right and left and is manually adjustable 45° right and left, 90° up, and 45° down. Users can get up to 17 hours of run time using one 40V max XGT 4.0Ah Battery (BL4040, sold separately).
Accessories
40V max XGT 5.0Ah Battery (BL4050F) – New 40V max XGT 5.0Ah Battery is engineered for higher output power and up to 25% longer run time than the 40V max XGT 4.0Ah battery (BL4040). It can reach a full charge in 50 minutes or less.
40V max XGT USB Adaptor (ADP001G) – The adaptor features 2 USB ports for quick and easy charging.
40V | 80V max XGT® System
XGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the competition.
For more information, please visit makitatools.com/XGT
source