Here are 4 safe ways to remove/salvage/upcycle a glued PVC/ABS/CPVC fitting to save $$$ !!
————————————————————-
Amazon affiliate links to all the products I used in this video:
Milwaukee 28 Holesaw Kit: https://amzn.to/2oivWW5
18″ RIDGID Pipe Wrench: https://amzn.to/2mb0sRi
Channel Lock 8″ Needle Nose Pliers: https://amzn.to/2nIfgac
REED Clean Ream 1 1/2″ (better but $$$): https://amzn.to/2m9srkg
REED Clean Ream 1 1/2″ (cheaper model $$): https://amzn.to/2m5nN6J
Cheaper socket saver ($):https://amzn.to/2mGaJ8p
Milwaukee M18 Brushless Drill: https://amzn.to/2onk1qb
Milwaukee One handed Hacksaw (Reciprocating blade compatible): https://amzn.to/2nD7ONI
————————————————
To become a Got2Learn Subscriber: https://bit.ly/2IuENO5
DISCLAIMER: Got2Learn is NOT responsible for any damage done to a property of which the plumbing wasn’t done by a professional, I do not recommend doing your own plumbing if you are unsure about what you are doing, always hire a LICENSED contractor when doing any type of plumbing so you can be covered by insurances if something does happen, these videos are for entertainment purposes only!
, https://i.ytimg.com/vi/UPzUBxvB8jo/hqdefault.jpg
source
2021-08-21
Amazon affiliate links to all the products I used in this video:
Milwaukee 28 Holesaw Kit: https://amzn.to/2oivWW5
18" RIDGID Pipe Wrench: https://amzn.to/2mb0sRi
Channel Lock 8" Needle Nose Pliers: https://amzn.to/2nIfgac
REED Clean Ream 1 1/2" (better but $$$): https://amzn.to/2m9srkg
REED Clean Ream 1 1/2" (cheaper model $$): https://amzn.to/2m5nN6J
Cheaper socket saver ($):https://amzn.to/2mGaJ8p
Milwaukee M18 Brushless Drill: https://amzn.to/2onk1qb
Milwaukee One handed Hacksaw (Reciprocating blade compatible): https://amzn.to/2nD7ONI
Great tips probably the best tips I have seen as far as the trades go
Algorithms
Guilty As Charged… done the pipe on fire to Expand pipe to slip to other pipe.
My water hose is stuck on spray nozzel and the calcium buildup is so bad it wont break free by using two wrenches, any suggestions? I was curious, is there a air compressor tool/machine that can hold one end and turn the nozzel?
Option 1 = Fumes, thats terrible, what's the next option?
Option 2 = $70!!!! Fumes not so bad.
FYSA On tight spaces, such as between two studs, use a right angle drill or right angle drill adapter. Too easy.
Also instead of heating and ruining your hole saw bits, find scrap pieces of metal pipe to do the heat removal process. Also a heat gun will work as well.
വളരെ നന്നായിരിക്കുന്നു
"What if it's between the studs?" How about you spend $5 and just cut the pipe and make a connection to clean pipe on both ends.
It's going to leak
Don't be stupid get a Mexican to do the hard demo then you can fix it most proper
I don’t see any blue glue on any of these joints shown. I only see primer.
Probably not a good idea to drink beer and set a PVC pipe on fire on the job in a customer's house. 9:28?
Is there a slip pvc fitting when you can't move the pipes?
What about removing a primered & cemented/ glued 2" sch40 slip coupling from a pool diverter valve. Such as Jandy, CMP, Hayward, etc 2 or 3 way diverter valve. I have battled this POS of a cmp 2 way diverter valve with a 2" coupling with a 2" to 1.5" bushing, and about 3 inches of 1.5" sch40 pvc pipe sticking out of that. I've tried all methods except cutting and the socket saver or ream tool. I have to either remove all or cut it down to the nipple on the Jandy Valve, excuse me… the diverter valve. I wish someone would make a tool that would go over the fitting and rapidly shave or sand it down for removal. Instead I have been removing my hair by the handful.
Any help would be much appreciated! Thanks for the informative video.
reason why number 1: too broke get anymore, atleast thats my case lol
Excellent examples and precise description of method. Well done young man!
This saved me! Instead of a hole saw blade, I used an old socket. (A 9/16” socket fit inside a 3/4” schedule 40 PVC pipe!
For the last method, where you remove it with the saw…why are you waiting so long between cuts? Your first cut is at 12, and your next is at 3? Why do you need to wait so long?
Or just buy an 'inside connector' that is made for the size PVC you are working with.
In most cases the size reduction is not enough effect the required flow.
Very accurate.
Only Milwaukee has the full power to execute plumbing work.
Thank you.
Sometimes you can just leave the existing pipe end as it is, and glue a new short length of a different size pipe or coupling inside the existing pipe end. If the new pipe or coupling is a little too large to fit into the the existing pipe end, you use can use a propane torch to first soften the new pipe/fitting.
Conversely, sometimes you can use a new pipe/fitting piece to go on to the outside of the existing pipe end, again using a propane torch to soften the new pipe/fitting piece so it will fit. (If the new pipe/fitting piece is a little too large, you can use 2 or 3 hose clamps to tighten it onto the existing pipe end.)
The above won't pass any kind of inspection, but on your own farm etc., so what?