Where is wire installation for multi-zones ? How to create a corridor ?
Clarification may be helpful on the laying of a clockwise wire polygon (not really a 'circle' since wire must be staked taut in intervals around the object to be avoided. Clockwise is more precisely explained when it's understood that the STARTing end of the boundary wire must always be connected to the Landroid base's RED terminal. Once the entire boundary is laid, that wire end must be connected to the base's BLACK terminal. Water Example: if the boundary wire were instead a small pipe with water flowing in it, the water would flow FROM the RED terminal of the base thru the entire boundary, and finally back to the BLACK terminal of the base. So when laying the pipe (wire), the flow coming from the base will always circulate in a clockwise direction (FROM red TO black) thru the entire boundary and any sub-loops placed in it.
Salve volevo sapere la differenza tra l'aggiornamento 2.9 a 2.92. Cosa e stato migliorato perchè il mio robot e fermo da ottobre, quindi volevo sapere le novità dato che lo devo posizionare nei prossimi giorni. Grazie
Where is wire installation for multi-zones ? How to create a corridor ?
Clarification may be helpful on the laying of a clockwise wire polygon (not really a 'circle' since wire must be staked taut in intervals around the object to be avoided. Clockwise is more precisely explained when it's understood that the STARTing end of the boundary wire must always be connected to the Landroid base's RED terminal. Once the entire boundary is laid, that wire end must be connected to the base's BLACK terminal. Water Example: if the boundary wire were instead a small pipe with water flowing in it, the water would flow FROM the RED terminal of the base thru the entire boundary, and finally back to the BLACK terminal of the base. So when laying the pipe (wire), the flow coming from the base will always circulate in a clockwise direction (FROM red TO black) thru the entire boundary and any sub-loops placed in it.
Salve volevo sapere la differenza tra l'aggiornamento 2.9 a 2.92. Cosa e stato migliorato perchè il mio robot e fermo da ottobre, quindi volevo sapere le novità dato che lo devo posizionare nei prossimi giorni. Grazie